Z. Hao, W. Hong, H. Li, H. Zhang, and K. Wu,“Multiway broadband substrate integrated
waveguide (SIW) power divider”, In IEEE Antennas and Propagation Society Int. Symp.,pp. 639-642, 2005.
 H. Uchimura, T. Takenoshita, and M. Fujii,“Development of a “laminated waveguide””,
IEEE Trans. Microw. Theory Tech., vol. 46, no.12, pp. 2438-2443, November, 1998.
 L. Yan, W. Hong, K. Wu, and T. J. Cui,“Investigations on the propagation characteristics
of the substrate integrated waveguide based onthe method of lines”, IET Microw. Antennas
Prop., vol. 152, no. 1, pp. 35-42, February, 2005.
 M. Bozzi, A. Georgiadis, and K. Wu, “Review of substrate-integrated waveguide circuits and
antennas”, IET Microw. Antennas Prop., vol. 5,no. 8, pp. 909-920, June, 2011.
 W. Hong, B. Liu, Y. Wang, Q. Lai, H. Tang, X.X. Yin, Y. D. Dong, Y. Zhang, and K. Wu, “Half
mode substrate integrated waveguide: A new guided wave structure for microwave and
millimeter wave application”, In Infrared Millimeter Waves and 14th International
Conference on Teraherz Electronics, Shanghai,pp. 219-219, 2006.
 E. J. Wilkinson, “An N-way hybrid power divider”, IRE Trans. Microw. Theory Tech., vol.
8, no. 1, pp. 116-118, January, 1960.
 K. K. M. Cheng, and P. W. Li, “novel powerdivider design with unequal power-dividing ratio
and simple layout”, IEEE Trans. Microw. Theory Tech., vol. 57, no. 6, pp. 1589-1594, May, 2009.
 H. R. Ahn, and I. Wolff, “Ahn, H. R., & Wolff,I. (2001). General design equations, small-sized
impedance transformers, and their application to small-sized three-port 3-dB power dividers”,
IEEE Trans. Microw. Theory Tech., vol. 49, no.7, pp. 1277-1288, July, 2001.
 M. J. Park, and B. Lee, “A dual-band Wilkinson power divider”, IEEE Microw. Wirel. Compon.
Lett., Vol. 18, no. 2, pp. 85-87, February, 2008.
 U. H. Gysel, “A new N-way power divider/combiner suitable for high-power
applications”, In IEEE Microw. Symposium,Palo Alton, CA, pp. 116-118, 1975.
 S. Y. Chen, D. S. Zhang, and Y. T. Yu,“Wideband SIW power divider with improved
out-of-band rejection”, Electron. Lett., vol. 49,no. 15, pp. 943-944, July, 2013.
 T. Li, and W. Dou, “Broadband substrateintegrated waveguide T-junction with arbitrary
power-dividing ratio”, Electron. Lett., vol. 51,no. 3, pp. 259-260, February, 2015.
 X. Zou, C. M. Tong, and D. W. Yu, “Y-junction power divider based on substrate integrated
waveguide”, Electron. Lett., vol. 47, no. 25, pp.
1375-1376, December, 2011.
 N. Smith, and R. Abhari, “Compact substrate integrated waveguide Wilkinson power
dividers”, In IEEE Antennas and PropagationSociety Int. Symp., Charleston, SC, pp. 1-4,2009.
 Z. Y. Zhang, and K. Wu, “Broadband half-mode substrate integrated waveguide (HMSIW)
Wilkinson power divider”, In IEEE Microw.Symposium Digest, Atlanta, GA, pp. 879-882,2008.
 D. M. Pozar, Microwave Engineering. Wiley,2011.
 F. Xu, and K. Wu, “Guided-wave and leakage characteristics of substrate integrated
waveguide”, IEEE Trans. Microw. Theory Tech.,vol. 53, no. 1, pp. 66-73, January, 2005.
 J. E. Rayas-Sánchez, and V. Gutierrez-Ayala, “A general EM-based design procedure for singlelayer
substrate integrated waveguide interconnects with microstrip transitions”, In IEEE Microw. Symposium Digest, Atlanta, GA,pp. 983-986, 2008.
 K. Wu, D. Deslandes, and Y. Cassivi, “The substrate integrated circuits-a new concept for
high-frequency electronics and optoelectronics”,In Telecommunications in Modern Satellite, Cable and Broadcasting Service, pp. P-III, 2003.
A. Abbosh, and B. Henin, “Planar wideband inphase power divider/combiner using modified Gysel structure”, IET Microw. Antennas Prop., Vol. 7, no. 10, pp. 783-787, July, 2013.
J. N. Hui, W. J. Feng, and W. Q. Che, “Balun bandpass filter based on multilayer substrate integrated waveguide power divider”, Electron. Lett., vol. 48, no. 10, pp. 571-573, May, 2012.
U. Rosenberg, M. Salehi, J. Bornemann, and E. Mehrshahi, “A novel frequency-selective power combiner/divider in single-layer substrate integrated waveguide technology”, IEEE Microw. Wirel. Compon. Lett., vol. 23, no. 8, pp. 406-408, June, 2013.