A Wideband Transmitarray Antenna Design Based on the Transmission Characteristic of the UnitCell

Document Type : Research Article

Authors

Department of Electrical Engineering, Yazd University, Yazd, Iran

Abstract

In this paper, a procedure is proposed to design a wideband transmitarray upon a specified frequency band. In this way, the phase control parameter of a unit cell is adjusted in a suggested range, ensuring linear phase change and low transmission loss over the band. The unit cell is designed for a range of phase control parameters (e.g., slot length in a CSRR), in which a 360° phase variation is provided. Part of this range is applied for the central elements of TA, in which the maximum overlapped passband (for different values of phase control parameter) around the desired frequency is to be achieved. In this way, a scenario for the phase specification of the array elements would be obtained. This range is specially applied for the central elements of the array, which are in exposure to feed peak power. As a proof of this concept, a 14×14 element transmitarray is designed and fabricated based on a back-to[1]back square Complementary Split-Ring Resonator (CSRR). Measurement results indicate maximum gain, 1-dB bandwidth, and aperture efficiency of 24.6 dB, 18.4%, and 53% respectively, at the center frequency of 11.5GHz. At the end of the paper, a comparison between the proposed TA and the previous ones is provided.

Keywords

References

[1] G. Liu, H.-j. Wang, J.-s. Jiang, F. Xue, and M. Yi, “A high-efficiency Transmitarray Antenna using double split-ring slot elements,”IEEE Antennas and Wireless Propagation Letters, 14 (2015) 1415-1418.
[2] A. H. Abdelrahman, A. Z. Elsherbeni, and F. Yang, “High-gain and broadband Transmitarray Antenna using triple-layer spiral dipole elements,” IEEE Antennas and Wireless Propagation Letters, 13 (2014) 1288-1291.
[3] M. N. Jazi, M. R. Chaharmir, J. Shaker, and A. R. Sebak, “Broadband Transmitarray Antenna design using polarization-insensitive frequency selective surfaces,” IEEE Transactions on Antennas and Propagation, 64 (2016) 99-108.
[4] B. Rahmati and H. Hassani, “High-efficient wideband slot Transmitarray Antenna,” IEEE Transactions on Antennas and Propagation, 63 (2015) 5149-5155.
[5] Q. Luo, S. Gao, M. Sobhy, and X. Yang, “Wideband transmitarray with reduced profile,” IEEE Antennas and Wireless Propagation Letters, 17 (2018) 450-453.
[6] A. H. Abdelrahman, P. Nayeri, A. Z. Elsherbeni, and F. Yang, “Bandwidth improvement methods of Transmitarray Antenna s,” IEEE Transactions on Antennas and Propagation, 63 (2015) 2946-2954.
[7] K. Yan, X. Lv, Z. Han, and Y. Zhang. “ Transmitarray Antenna with Double Conformal Rings as the Cell Elements.” Applied Computational Electromagnetics Society Journal 34(7) (2019).
[8] M. –Y. Li, Y. –L. Ban and F. –Q. Yan, “Wideband Low[1]profile Ku-Band Transmitarray Antenna,” IEEE Access, 9 (2021) 6683-6688.
[9] S. H. Ramazannia Tuloti, P. Rezaei and F. Tavakkol Hamedani, “High-Efficient Wideband Transmitarray Antenna,” IEEE Antennas and Wireless Propagation Letters, 17(5) (2018) 817-820.
[10] W. Hu, J. Dong, Q. Luo, Y. Cai, X. Liu, L.Wen, W.Jiang, and S. Gao, “ A Wideband Metal-Only Transmitarray With Two-Layer Configuration,” IEEE Antennas and Wireless Propagation Letters, 20(7) (2021) 1347-1351.
[11] P. Feng, S. Qu, and S. Yang, “Ultrawideband Low[1]Profile Transmitarray With Vivaldi Array Feed,” IEEE Transactions on Antennas and Propagation, 68(4) (2020) 3265-3270.
 [12] Boccia, I. Russo, G. Amendola, and G. Di Massa, “Multilayer Antenna-Filter Antenna for Beam-Steering Transmit-Array Applications,” IEEE Transactions on Microwave Theory and Techniques, 60(7) (2012) 2287- 2300.
[13] J. Huang, “Reflectarray antenna,” Wiley Online Library, (2008).
AUT Journal of Electrical Engineering
Volume 55, Issue 1
2023
Pages 3-10

Files

Share

How to cite

Statistics